|
Turn SYSTEM POWER on.
Set the VIDEO SOURCE to SOURCE 1.
(Refer to the instructions posted on the wall for assistance.)
Lower the SCREEN (hold button until all sound stops!)
Plug POWER CORD OF THE DEVICE into the podium outlet.
Plug the three colored RCA PLUG WIRES into their appropriate jacks:
YELLOW – Video Out on Unit
RED - RIGHT Audio Out on Unit (Or MONO Audio Out)
WHITE - LEFT Audio Out on Unit (Leave empty for mono)
Turn PROJECTOR on by using the remote connected to the podium.
The projector may take a minute to warm up.
Press the INPUT button until the screen says VIDEO in the upper right hand corner. (Set this to Input1 if you are using a computer connected to the VGA port on the podium)
Put Video Tape / DVD in the unit and press PLAY.
Please TURN OFF the projector (Hit the Off button TWICE).
Please RAISE the screen (Hold button until ALL SOUND STOPS).
|
