|
Connect your VCR, DVD-player, computer, or Sony Playstation, Nintendo, etc. to the jacks located on the wall beside the projector screen…
For all devices EXCEPT a computer:
Connect the RCA Video Out jack of your unit to the Video In jack on the wall using a standard RCA cable.
Connect the RCA Audio Out jack(s) of your unit to the Audio Out jack(s) on the wall using a standard RCA cable. If your unit is MONO (has only one audio jack), connect it to the RIGHT Audio jack on the wall.
For a computer:
Connect the VGA (monitor) jack of your computer to the VGA input jack on the wall using a standard VGA extension cable.
If you want sound, connect your audio out jack(s) to the audio in jacks on the wall (you may need a headphone to RCA adapter).
Turn on the projector…
Use the remote control located near the wall jacks.
Or, reach up to the projector controls and hit the power button.
Make sure you turn OFF the projector when you are done!
Select the projector mode…
Use the input selection of the remote control to change the input mode to Video or Computer, depending on your application.
Or, reach up and use the projector controls to change the input mode to Video or Computer, depending on your application.
Press play or start on your device and have fun.
PLEASE TURN OFF THE PROJECTOR WHEN YOU ARE DONE WITH IT! This will save the expensive projection bulb from burning out sooner than necessary.
|
